The KST X06H has a hardened steel drive train and a coreless motor capable of running all the way from 3.8V to 8.4V (1S to 2S LiPo) making these WV (wide voltage range) servos will deliver the power and reliability you need. Although some say this tiny servo is too small for 1.5m DLG aileron surfaces it actually has more torque on 2S LiPo than a KST X08 has on a 1S battery.
The accessories include four strong nylon output arms, two double sided, and two single sided, one of which is low profile. This means that when the servos are mounted one in front of the other the control rod of the front one won’t foul the rear one.
KST X06H Features
- Horizontal mounting lugs to facilitate easy mounting in wings and tail surfaces
- Ultra slim 7 mm body – the thinnest metal cased servo in the world
- Compact and light weight design
- Good torque and speed
- Wide 1S to 2S LiPo voltage range
- Excellent heat dissipation
- 7075 Alloy casing
- Hardened Steel gears
- Designed for lightweight high performance RC Gliders
| KST X06H V6 Wing Servo Specifications | ||
|---|---|---|
| Body dimensions | 20.0 mm wide x 7.0 mm thick x 16.6 mm high | 0.79″ wide x 0.28″ thick x 0.65″ high |
| Max dimensions | 28.0 mm wide x 7.0 mm thick x 19.3 mm high | 1.10″ wide x 0.28″ thick x 0.76″ high |
| Stall torque (3.8V) | 0.8 Kg.cm | 11 oz.in |
| Stall torque (6V) | 1.5 Kg.cm | 21 oz.in |
| Stall torque (8.4V) | 1.8 Kg.cm | 25 oz.in |
| Weight | 6.4 g | 0.23 oz |
| Lead length | 15 cm | 5.9 in |
| Operating speed (3.8V) | 0.12 sec/60° | |
| Operating speed (6V) | 0.08 sec/60° | |
| Operating speed (8.4V) | 0.07 sec/60° | |
| Operating voltage | 3.8V to 8.4V | |
| Operating temperature | -20 to +65 °C | |
| Bearings | 1 ball bearing | |
| Gear material | Hardened Steel | |
| Case material | 7075 aluminium alloy | |
| Motor type | Coreless DC motor | |
| Working frequency | 333 Hz | |
| Dead band/resolution | 2 µs | |
| Pulse width for ± 60º | 1000 – 2000 µs | |
| Digital | Yes | |
| Programmable | No | |
| Position feedback | Potentiometer | |
| Supplied accessories | 4 output arms, 2 arm retaining screws, 4 mounting screws | |
| Optional accessories | Pulley For KST X08, KST X06 Arm Set, KST X06 X06N X06H Gear Set, Plastic Frame only for the KST X06H, Ply Frame for KST X06H | |
Note although the X08 arms will fit they are slightly deeper. When fully screwed into place the arm will jam on the top of the servo case. Either trim away a little of the nylon arm sleeve, or avoid fully tightening the retaining screw.
Stall Current: 0.58A
Continuous rated Current: 0.22A





















Reviews
There are no reviews yet.